replacement hammer butt springs

[Farrell]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Take the spring rail off, take the old springs out, and install new =
original-type springs.

Terry Farrell
  ----- Original Message -----=20
  From: Elwood Doss, Jr.=20
  To: Pianotech List=20
  Sent: Thursday, August 05, 2004 7:48 PM
  Subject: replacement hammer butt springs


  Anyone have any good ideas regarding installing repair hammer butt =
springs in an Acrosonic spinet?  I have the kind of springs that has a =
flat plate (really small) with a slot in it for placing a screw in it.  =
Anyone tried using thick CA glue or that new "gorilla glue" to attach it =
to the hammer butt spring rail?  Just wondered.
  Joy!
  Elwood=20

  Elwood Doss, Jr., RPT
  Piano Technician/Technical Director
  Department of Music
  145 Fine Arts Building
  University of Tennessee at Martin
  Martin, TN  38238
  731-881-1852
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/65/15/75/de/attachment.htm

---------------------- multipart/alternative attachment--