Metric Center Pin Sizes

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi again,
Jurgen, are you telling me that you use 25 sizes of pins?
What are the size of the ones most used?
Which ones do techs carry into a house for common repair?
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Jurgen Goering=20
  To: pianotech@ptg.org=20
  Sent: Thursday, August 05, 2004 8:57 PM
  Subject: Metric Center Pin Sizes


  List -=20

  I think German piano wire gauges are being mistaken for center pin =
sizes.  German piano wire sizes differ slightly from American gauges, =
but Joe Goss asked about center pin sizes.

  German center pins are not identified by any gauge, but by their =
thickness, e.g a pin with a diameter of 1.30 mm is called "1.30".  Very =
simple, actually.  Center pins are available from 1.10 mm through 1.70 =
mm in increments of  .025mm  (.043" to .067" increments of .001")   The =
conversion factor is 25.4.  =20

  The traditional European method of (re-)pinning uses 60cm (2 ft.) long =
center pin rods.  One of these days I might write a little piece on =
that.  If anyone is interested in these rods, visit my website:  =
www.pianofortesupply.com

  Jurgen Goering
  Piano Forte Supply



-------------------------------------------------------------------------=
---

          Subject: Re: Does any body really know__ what__ time it is =
Metric pins=20
          From: Conrad Hoffsommer <hoffsoco@martin.luther.edu>=20
          Date: Thu, 05 Aug 2004 13:47:37 -0500=20
          To: Pianotech <pianotech@ptg.org>=20


    At 12:43 8/5/2004 -0600, you wrote:=20

      Could anyone out there confirm the metric center pin size in =
inches> They seem to all be smaller than what we use here in the states. =

      The #25 is 1.500mm or .049 inches - that is our #19=20
      the 325.5 is 1.525mm or .050 inches - our #20=20
      Joe Goss RPT=20
      Mother Goose Tools=20


    Yo Mama,=20

    My Kawai and confirmed by Renner Hauptkatalog 891 charts say that:=20
    #25 =3D 1.5mm =3D .0591 or only .001 larger than US size #25=20
    #25.5 =3D 1.55mm =3D .061=20

    bitte...=20




    Conrad Hoffsommer - Music Technician=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a0/0b/03/38/attachment.htm

---------------------- multipart/alternative attachment--