---------------------- multipart/alternative attachment Listers & college techs Last month I posted about beefing up the wood fibers in the 24 small screw holes that hold the older style stwy music rack to the desk by inserting a bit of epoxy in the holes, spraying the screws with mold release & reinserting them. The mold release is so the screws can be taken out,tightened or serviced at a later date In conjunction with that I have now added the nice strong folding brace found in the Schaff cat. Part no.940-w called desk support. It is a far better set up than the folding metal stick with collar type it inserts in & far more permanent. Easy to locate & attach The 940-w is very similar to the support on all new stwys & I guarantee it will keep the screws from becoming loose & stripped from heavy books & players of all ages pressing the pages hard against the rack. This will now be sop on every stwy rebiuild. No more service calls with the rack laying in the piano & screws all over the place. Know what I mean? Regards, Dale Erwins Pianos Restorations 4721 Parker Rd. Modesto, Ca 95357 209-577-8397 Rebuilt Steinway , Mason &Hamlin Sales www.Erwinspiano.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c4/d3/bd/ed/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC