Bridge Drilling Jig

[Richard Brekne]

John

Good to see your name up again on the list, and I would love to be the 
first to congratulate you on your new endeavours, and on pulling so 
obviously well through what must have been a difficult time for you.  
Very nice posting as well btw...  keep em comming.

Cheers
RicB


John Hartman wrote:

> Dear Fellow technicians,
>
> As you know my participation in the Piano Technicians Journal was cut 
> short this past spring. I was in the process of developing several 
> articles for publication and got as far as taking photos and starting 
> some of the illustrations. Just so it wouldn't go to waist I have been 
> gathering some of the stuff on my web site for anyone who may be 
> interested. One of the articles I was working on was based on my 
> bridge bearing, drilling and knotching class.  One of the more useful 
> tools I developed is a simple bridge drilling jig. You can find the 
> photos and drawings by following the links below.
>
...............