This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I’m with you, Quentin. I love my rigid Yamaha hammer. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Quentin Codevelle Sent: Saturday, August 21, 2004 12:53 AM To: pianotech Subject: Rosewood tuning lever/hammer Hi Joe, of course not square grands !!. The yamaha #1 tip is big enough to tune everything unless the piano has not too small tuning pins. If the tip breaks, I can replace it because you can unscrew the base of the tip(which makes the angle with the "body"of the lever) and the tip itself. So no problem at all. Quentin ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e0/c7/5b/36/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC