Rosewood tuning lever/hammer

[Tom Driscoll]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
 

 

Subject: Rosewood tuning lever/hammer

 

Hi Joe,

 

of course not square grands !!. The yamaha #1 tip is big enough to tune
everything unless the piano has not too small tuning pins.

 

If the tip breaks, I can replace it because you can unscrew the base of
the tip(which makes the angle with the "body"of the lever) and the tip
itself.

So no problem at all.

 

Quentin

            Quentin,

            Nomenclature police here.

 The "base " is the head and the "body" of the lever is the shaft.

            Tom ----just want the crew to know I'm still on the beat --
Driscoll  <G>

            

            P.S. Kudos for using lever, not hammer and who cares about
those squares anyway---

            Relax Joe -just kidding 

T.D.

            

 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0b/6f/cf/00/attachment.htm

---------------------- multipart/alternative attachment--