Pinning on new flanges

[Richard Brekne]

Never tried it.  Didnt seem necessary as I always do this when 
repinning, and I always repin when there is a problem with centers.  
I've never experienced much success at solving (permantly) a center pin 
problem by the addition of some or another form of liquid lubrication.  
You never know whats been in there from before... and how what you are 
adding to the mix will work out.

Cheers
RicB

gordon stelter wrote:

>Rick, 
>    What about using the Protek-Teflon mixture in the
>flange bushings ?
>     Thump
>
>--- Richard Brekne <Richard.Brekne@grieg.uib.no>
>wrote:
>
>  
>