I primarily meant as a carrier, as opposed to mechanically trying to stuff it into those tiny holes. Thump --- Richard Brekne <Richard.Brekne@grieg.uib.no> wrote: > Never tried it. Didnt seem necessary as I always do > this when > repinning, and I always repin when there is a > problem with centers. > I've never experienced much success at solving > (permantly) a center pin > problem by the addition of some or another form of > liquid lubrication. > You never know whats been in there from before... > and how what you are > adding to the mix will work out. > > Cheers > RicB > > gordon stelter wrote: > > >Rick, > > What about using the Protek-Teflon mixture in > the > >flange bushings ? > > Thump > > > >--- Richard Brekne <Richard.Brekne@grieg.uib.no> > >wrote: > > > > > > > > _______________________________________________ > pianotech list info: > https://www.moypiano.com/resources/#archives > __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail
This PTG archive page provided courtesy of Moy Piano Service, LLC