Pulling plates/rim protection

[Greg Newell]

---------------------- multipart/alternative attachment

Chuck,
         Nope, no picture needed. Not a bad idea if you can be sure to=20
prevent the aluminum channel from sliding and gouging at the ends.
Thanks for the post.
Greg Newell


At 09:43 AM 12/9/2004, you wrote:
>A neat thing Tom Servinsky showed me:  Sheet aluminum bent in a =91U=92=
 shape,=20
>cut to about 12=94-18=94 lengths (to fit around curves as well), and lined=
=20
>with scrap felt/wool material (from string cover scrap), deep enough to=20
>cover most of inside of rim.  Made a bunch of them that fit easily into a=
=20
>box that goes up on top shelf until needed again.
>Get the picture? Or is a picture needed?
>Chuck C. (FL)

Greg Newell
Greg's piano Fort=E9
mailto:gnewell@ameritech.net=20
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f1/0f/3d/5a/attachment.htm

---------------------- multipart/alternative attachment--