This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Terry, I use the driver end of a 1/4" socket driver extension An 8 star deep well socket is the same as a straight sideed tool but = might chew the sides a little if the nut is too tight. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Terry=20 To: pianotech@ptg.org=20 Sent: Monday, December 13, 2004 9:56 AM Subject: Square Nut Driver I'm having trouble finding square nut drivers for 1/4" & 5/16" nuts - = the rubber nuts one finds on some spinets. Any ideas? Supply houses don't list 'em in catalogs. McMaster-Carr doesn't seem = to have them. Haven't found anything on a google search. Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/76/6e/23/ab/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC