This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Terry: I found a set of nut drivers at my local hardware store that had = both sizes. I also use the adjustable tool sold in the supply catalog in = my combo handle or in a drill. I believe it is Schaff's #3333 . Patrick C. Poulson Registered Piano Technician Piano Technicians Guild ----- Original Message -----=20 From: Terry=20 To: pianotech@ptg.org=20 Sent: Monday, December 13, 2004 8:56 AM Subject: Square Nut Driver I'm having trouble finding square nut drivers for 1/4" & 5/16" nuts - = the rubber nuts one finds on some spinets. Any ideas? Supply houses don't list 'em in catalogs. McMaster-Carr doesn't seem = to have them. Haven't found anything on a google search. Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3f/6c/53/d1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC