Yes it will clean off with water. But you must get it right away. Remember, the brush cleans with water. Regards, John M. Ross Windsor, Nova Scotia, Canada > John, are you suggesting that PVC-E will clean off the top surface of > keytops with water? Water soluble it aint. You can put a glob of PVC-E on > a flat surface like glass or metal, let it cure then peel it off and boil > it. It will get soft but won't melt. > > I've had good success removing a plastic keytop put on with PVC-E that was > damaged by warming it with a hair dryer and lifting it with a pocket knife. > It leaves a gooey mess but I just put more on and reinstall. > > Carl Meyer Ptg assoc > Santa Clara, Ca.
This PTG archive page provided courtesy of Moy Piano Service, LLC