Greetings to everyone on the list.I have a couple of questions for general comment 1.I have seen a Staib-Abendschein action before,but I may be called upon soon to work on one,and I'm wondering if there is anything I should know before starting.The action in question is badly out of reg.in the usual manner for an old upright(2 1/2 blow,1/2 dip,3/4 letoff,?? checking)and I'm hoping that getting it back in the ballpark spec-wise will do the trick.Any suggestions would be helpful. 2.There is a local tooner who is in the habit of using WD-40 on action centers.I have followed this guy's work pretty often,and I'm seeing a lot of "gummed up" actions,I presume from the WD-40(customers tell me it gets sprayed pretty indiscriminately).I have gotten some relief with Pro-tek and a heat gun,but I wonder what the long term effect will be.As you may have guessed,I'm gathering ammunition.At the risk of opening the floodgates,I'm hoping to hear from anyone with info. or experience on the subject. Thanks, Alan Heneberry ________________________________________________________________ Sent via the PlanetComm WebMail system at mail.planetcomm.net
This PTG archive page provided courtesy of Moy Piano Service, LLC