Hi daniel, This piano needs some serious spacing, travel, and shank burn in, before tidying up the shaping. Regards roger At 02:18 PM 1/13/2004, you wrote: >i forget. is it always a good idea to check resistance on all action >centers and re-pin, if necessary, even if all the parts are brand new? >as i've mentioned before, i'm working on a baldwin sd-10. >and another thing, this was my second hammer filing ever, and i seem to >have taken slightly too much felt off. so i have a slightly uneven >hammer line in the bass section. > >daniel carlton > > >Photos at: > >https://www.moypiano.com/ptg/files/attachments/96/f3/26/b7/ hammerline1.jpg > >https://www.moypiano.com/ptg/files/attachments/62/14/53/aa/ hammerline2.jpg > >https://www.moypiano.com/ptg/files/attachments/ab/cd/9c/f3/ hammerline3.jpg > > >Alternate URL: > >http://tinyurl.com/279h5 > >http://tinyurl.com/2lsvm > >http://tinyurl.com/2l6cv > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC