brass flange parts supplier?

Keith McGavern kam544@gbronline.com
Wed, 14 Jan 2004 16:50:55 -0600


---------------------- multipart/alternative attachment
At 10:22 AM -0500 1/14/04, Piannaman@aol.com wrote:
>... Most of the flanges seem okay, but three of the tongues that 
>hold the pins to the rail were broken.  I couldn't find anything 
>matching in the Schaff catalogue.  

Dave,

*Unless* they are oddball shaped, one of those brass rail repair 
items that Schaff offers should work.

You can purchase a dozen of everything they offer on page 99, and get 
a clear plastic parts box with compartments to keep them in, so the 
next time you go out on the Vose & Sons, you'll have what is takes to 
make a repair if necessary.

Regards,

Keith
-- 
Keith McGavern
Registered Piano Technician
Oklahoma Chapter 731
Piano Technicians Guild
USA
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8a/20/75/88/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC