This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment If memory serves me....don't Baldwins have a nice screw to adjust = tension? ----- Original Message -----=20 From: daniel carlton=20 To: pianotech@ptg.org=20 Sent: Tuesday, January 13, 2004 3:18 PM Subject: Baldwin springs i'm doing a regulation job on a Baldwin SD 10. i've replaced all the = whippens w/ new ones and i'm wondering how i go about weakening the rep = springs. i've taken my Hart spring tool and tried to weaken the spring = by pushing down on the top of the arc of the spring, pretty much halfway = between the jack and where the spring attaches to the whip (am i making = any sense at all?) i tried adjusting the screw first, but the springs = were still too stout. thanks for any advice. =20 by the way thanks to all who replied to my last posted question. the = info really helped. daniel carlton ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2a/ba/71/11/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC