Quickie Pitch Raise

[Cy Shuster]

Doesn't this only bring the monochord section up to "A440 tension", the
bichord section halfway up, and the trichords only 1/3 of the way up to
tension?

It still might be a better approach, but you can't raise up less than half
the strings and claim that all the tension is up to where it's going to
be...

I wonder if different patterns (bass first, etc.) are better suited to
different plate designs?

--Cy Shuster--
Rochester, MN

----- Original Message ----- 
> > At 08:45 PM 1/14/2004 -0500, you wrote:
> >> By doing that [raising one out of three or two strings], the total
tension on the system is up to A440.