What would you have done?

[Richard Brekne]

---------------------- multipart/alternative attachment
You did about what you could. Along with a pat on the shoulder to the
pianist that all is as well as it can be under the circumstances. Sounds
like you checked out a few basic repetition issues. You could have
looked at a few more just for edification, and perhaps to discuss with
the regular tech for the instrument... That can be instructive for your
own knowledge.

So... how did the pianist end up responding ?

RicB


Phil Bondi wrote:

> Here was the situation today:
>
> -Well-known pianist coming into town playing on a piano I am not
> familiar with..the regular tech just couldn't make the gig, so he
> called me to do it.
>
> -The piano is a S&S D and has been re-strung, new whips, hammers,
> shanks..good work was done to it.
> - The note left behind for me from the pianist when I arrived asked me
> to do something with the repitition..it seemed 'sticky' and if I could
> do anything about a few dampers..
>
> -Well, not wanting to step on any toes, I learned, after I pulled the
> action, that this Pianist likes active repitition, because what was
> presented to me was in good working order. This Pianist has played on
> the 'D' that I care for, and he loved it..I have the spring tension
> set a little active on that one..and the action is a tad lighter on
> mine.
>
> So .. I was able to quiet the dampers, but what to do about the
> repitition request with little to no time to work with?
>
> What I did was put some teflon powder on the knuckles hoping that
> would make it feel lighter to him.
>
> What would you have done?
>
> -Phil Bondi(FL)
>

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/17/ac/6d/c4/attachment.htm

---------------------- multipart/alternative attachment--