This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Joe, Yes, that would normally help in such a situation, but I managed to = complicate things quite a bit by using MANY small pieces of wood - each = lamination layer was made of up to six pieces - I'd have to have nails = all over the place! You don't want to know any more than that. I will be = modifying my cap building method (thanks Ron N.) and each lamination = piece will cover an entire bridge section - maybe I'll still need = something to hold it in place, although I don't think so. Terry Farrell ----- Original Message -----=20 From: Joe And Penny Goss=20 To: Pianotech=20 Sent: Thursday, January 22, 2004 9:38 AM Subject: Re: Bridge Caps - Soundboard Shipping Hi Terry, Would a small brad at the ends of the cap stop the creep? Set into the = cap so as not to cause problems in clamping or proud so that they could = be removed. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Farrell=20 To: Pianotech=20 Sent: Thursday, January 22, 2004 5:02 AM Subject: Re: Bridge Caps - Soundboard Shipping Ah geeeeezzzzzzeee! I hate when that happens. Uh, need I say that = post was meant to go private? Now the whole bloody truth is out: Yes, I have indeed made my = fist-ever mistake ;-). I knew it would come sooner or later - but I = had hoped to not broadcast the whole affair to a world-wide audience. :-( Hey, at least I wasn't bad-mouthing anyone - whew! :-) Terry Farrell ----- Original Message -----=20 From: Farrell=20 To: Pianotech=20 Sent: Thursday, January 22, 2004 6:47 AM Subject: Bridge Caps - Soundboard Shipping Hi Fred, MEGA-EMBARRASSING SNIP Please let me know. Sorry about the cap delay. Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4a/0c/cf/9c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC