Today's Annoyance

[Ron Nossaman]

>And the bridge pins do not bisect the edge of the notch very well - some are
>almost completely off into the notch.
>
>Is that a Baldwin, i.e., is that a vertically laminated bridge with no cap?
>Or is that a solid bridge with no cap and what could be mistaken for
>laminations in this photo are just the annular rings?
>
>Terry Farrell


You're right. Those aren't laminations. Not a Baldwin, and it does appear 
to be capped on second look. Probably a D 541281, as Kent indicated. <G>

The notch being behind the pin bisect sure isn't unusual, but won't be a 
problem until the pins get loose.

Ron N