---------------------- multipart/alternative attachment Dean, If this is true why does the veneer glued on the sides of a broken= =20 key affect such a lasting repair? Greg Newell At 11:37 AM 6/3/2004, you wrote: > >>I am toying with trying to put a very thin coat of epoxy on either side= =20 > of the key about two inches on either side of the button. This may give= =20 > me the stiffness they need. > > > From a structural standpoint all of your stiffness comes from the upper=20 > and lower fibers of the key. Think of the key as an I-beam. The load of=20 > the I-beam is carried by the upper and lower flanges. The web in the=20 > middle carries next to nothing, it only connects the flanges. > >So adding stiffness to the sides will not accomplish much. It needs to be= =20 >added primarily to the portion under tension, that would be the top of the= =20 >key. Most of your deflection will come from the wood under tension, not=20 >the part under compression. And the weakest part of the key is the balance= =20 >rail hole. So the greatest payback is to add your stiffness to the button= =20 >and the connection of the button to the key. > >Super glue would penetrate the wood and the glue joint of the button. Keep= =20 >it away from the bushing cloth, obviously. > >Dean > >Dean May cell 812.239.3359 >PianoRebuilders.com 812.235.5272 >Terre Haute IN 47802 > > Greg Newell Greg's piano Fort=E9 mailto:gnewell@ameritech.net=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cd/5d/29/a1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC