Pulley Keys

[Ron Nossaman]

>I use Titebond as filler and a dummy keypin, which I remove after the hole 
>is sized but before it dries completely.  I try to be as tidy as possible 
>so as not to get any leftover glue on the bottom of the key.  This method 
>works well after one gets a bit enthusiastic in easing balance rail holes 
>in soft keys(DAMHIK). There are other methods in the Journal which were 
>published last fall, I believe.
>
>
>Dave Stahl

I use Elmers glue-all for this, because it's quieter than Titebond. It is, 
in fact, the only good use I've ever found for Elmers in piano work.

Ron N