I am half way through doing this on an "M" here at SMU. I glue sized first in the traditional way and that helped at least half of the keys. However, there are still pully keys so I'm doing the slot, veneer thing. It's not my favorite kind of job, but it has to be done. I have already made a note in the piano's data record that next time the piano is rebuilt it will need new keys! dave __________________________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 ----- Original message ----------------------------------------> From: David Love <davidlovepianos@earthlink.net> To: Pianotech <pianotech@ptg.org> Received: Thu, 10 Jun 2004 17:33:18 -0700 Subject: Pulley Keys >Anybody want to share favorite methods for fixing pulley keys? >David Love >davidlovepianos@earthlink.net >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC