Bridge over troubled waters

[Paul Chick (Earthlink)]

Subject: RE: Bridge over troubled waters



>What size drill do you use for #7, #8, #9, #10 bridge pin?
>
>Paul C

I don't have any disagreement with Pianotek's recommendations.

#46 (0.0810) for #7 (0.086)
#42 (0.0935) for #8 (0.096)
#36 (0.1065) for #9 (0.109)
#30 (0.1285) for #10 (0.135)


Ron N

Thanks Ron.  I looked at their bit sizes and wondered if they might be a
little too tight; will try them.

Paul C