This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Is this a better fix than applying CA without removing the pin? (Hmm, = must be careful not to CA the string to the pin, eh?) --Cy Shuster-- Bluefield, WV ----- Original Message -----=20 From: J Patrick Draine=20 To: Pianotech=20 Sent: Sunday, June 20, 2004 6:32 PM Subject: Re: New BB Perhaps the right strings' bridge pin are loose? Try putting a bit of = pressure on that bridge pin while playing the note. Does the false beat = disappear? If so, one could tap the bridge pin in slightly to get it = snug again. If the pins are really loose, drop the tension, pull the = pin, swag the hole with a bit of epoxy, drive the pin back in, bring the = string back up to tension, tune until stable. Patrick Draine ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b9/06/48/85/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC