Joseph Garrett wrote: >Jason and Terry said: "That sounds like an excellent idea. How would I >start?=20 > ----- Original Message -----=20 > From: Farrell=20 > To: Pianotech=20 > Sent: Friday, April 30, 2004 7:12 PM > Subject: Re: 1906 Stwy wippens > > > My recommendation would be to hire an experienced tech to help you do = >(or do) a complete geometry and touchweight analysis of the action - = >including new parts selection. That way you will know what is going to = >work best, what needs to be done, etc. Then you can go ahead and do it. = >Sounds like right now you are just shootin' in the dark. > > Jason, >You are in the Seattle area? Right? Why don't you run that past Ed McMorrow? >He's your resident expert and all around good guy. > > Yes... DEFINANTLY... if you are in North Seattle area... DO indeed get Ed involved in your project... if you can get him to lend you the time. RicB >Best Regards, >Joe Garrett, RPT, (Oregon) >Captain, Tool Police >Squares Are I > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC