This is a multi-part message in MIME format. ---------------------- multipart/mixed attachment Attached are two photos of a jig for routing out a new slot. It's made out of the scrap of an underlever tray and a couple segments of those dividers from Renner. Its designed to slide over a router holding a small end mill corresponding to the width of the knuckle core. You can use it also with a dremel table though you have to secure the dremel well enough that the mount doesn't flex. More of a no brainer than the band saw technique. David Love davidlovepianos@earthlink.net ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: P1010025.JPG Type: image/jpeg Size: 56262 bytes Desc: P1010025.JPG Url : https://www.moypiano.com/ptg/pianotech.php/attachments/80/ae/d3/0a/P1010025.JPG ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: P1010026.JPG Type: image/jpeg Size: 56457 bytes Desc: P1010026.JPG Url : https://www.moypiano.com/ptg/pianotech.php/attachments/9b/3c/22/4a/P1010026.JPG ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC