Alan asked: "Acrosonic, drop action w/wooden stickers that have metal pins on top that fit into a bushed guide rail ... Is there no way to remove the action and replace it without removing and individually replacing all 88 stickers? Mein Gott! Alan R. Barnard Salem, MO Alan, Sheesh! I thought everyone knew how to do this. The two dampers/heads, on either side of the "break", are most likely to get "trashed" when removing/installing an Acrosonic action. So, kill two birds with one load of pellets. 1. Remove those two dampers/heads and re-install them on the metal guide pin. One on #1 and the other on #88. This will hold them all on the rail while you do...#2. Remove the action. For installing the action, just reverse the process.<G> Best Regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I
This PTG archive page provided courtesy of Moy Piano Service, LLC