---------------------- multipart/alternative attachment >...So, the knuckle location had to be changed...extracting the hammers and rehanging them >on new shanks and flanges with a different knuckle location. This was a >lot more money than 2 or 3 hours of my time and a set of knuckles. Why not put identical weight hammers on new shanks. (Unless the shank length is not generic). This way you have a prehung set for some other job. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@comcast.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/07/02/4c/34/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC