This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Folks , Gotta give the other Joe G a thanks for the insight to make the better = design on my original try. The second attempt produced a 1/4" hex tool but the working end is minus = the hook that I thought might be needed to hold the tool on the capstan. = And is now much stronger.=20 Total length is about 2 1/2" with the tip 7/16" X .103" Leaving = clearance to be used with the keys still on the rail. =20 The bit will work in a small cordless electric screw driver or larger = unit if you want the power or a standard 1/4" hex drive handle for = manual removal of a few. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e5/12/50/8a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC