Michael--- not intending to grumble, but it seems to
me you may have been able to salvage the nickel
plating on the duplex bar had you gone at it with a
cloth wheel and buffing compound, rather than the wire
brush. My guess is that all the plating is gone, now,
and you'll have to have it replated.
Professional Busybody,
Thump
--- Michael Gamble <michael@gambles.fsnet.co.uk>
wrote:
> Hello all - the photos show the deplorable state of
> the Duplex bars and how I dealt with it - quite
> successfully. It also show Family Commitment in
> steaming off the purple underfelt to the damper
> heads. We use a dedicated capucino steamer for this
> job.
> Now I must go tune our Yam C-6 in the Pit for the
> LPO rehearsal.
> Regards from an early sun-drenched Tuesday in the
> Sussex Downs.
> Michael G.(UK)
>
>
> Download Photoshop(R) Album 2.0 Starter Edition free
> to create your own photo slideshows!
> http://www.adobe.com/getstarteredition>
_______________________________________________
> pianotech list info:
> https://www.moypiano.com/resources/#archives
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
This PTG archive page provided courtesy of Moy Piano Service, LLC