This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Terry, If you wet; then dry with a hair blower or Unger gun; then size with = the correct reamers; one minute per flange or so. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Farrell=20 To: pianotech@ptg.org=20 Sent: Wednesday, August 03, 2005 10:04 AM Subject: Flange Bushing Glue Drying Time How long does it take for a pre-glued Renner flange bushing with = sizing pin to dry to the point where one can be sure that bushing = size/pin fit will be stable? Any knowledgeable opinions? I'm trying to rush a piano teacher's damper lever repair job so she = doesn't have to cancel lessons. Anyone ever see that where the damper block (the thing the damper wire = is secured in) bushings compress to the point were the center pin has a = lot of play in the bushing? This is a 1950 or so Baldwin L grand. Thanks. Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/00/03/eb/07/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC