I couldn't remember the name of the screw type. But now that I am reminded that it is Torx, Jenson tools has what you need. Go visit: http://www.jensentools.com/product/group.asp?parent_id=4705 Geoff Sykes Assoc. Los Angeles -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of V T Sent: Tuesday, August 09, 2005 2:04 PM To: pianotech@ptg.org Subject: Renner Blues Ron, I don't have a lead on the tool ... but I have an idea of what I would do: This looks like the tip of a Torx driver. So, I would find a Torx head screw and attach the threaded part to a handle (pin vise?) of some kind and use the screw head to engage with the adjustment screw. Vladan Ron wrote: Anyone got a tool to adjust this? <G> Fortunately, there are a couple of spares in a set. At least with the wippens. Put a new back action in a S&S D, and you'll come up short. Ron N ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC