Sid, I am working on a twisted key now and taking pictures along the way for eventual posting on my website. The keytop will have to be replaced and sometimes the mortise after all the cutting, building up and trimming down is done. Good luck. ----- Original Message ----- From: "Sid Blum" <piano@sover.net> To: "Pianotech" <pianotech@ptg.org> Sent: Saturday, August 13, 2005 9:20 AM Subject: Warped/Twisted Keys > I'm working on a Baldwin Hamilton which has some badly twisted keys. There > are a couple of posts > in the archives that mention straightening by cutting kerfs in the keys > and shimming, but not enough detail to give me a clear picture of the > procedure. Any advice much appreciated. > > Sid Blum > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC