loose tuning pins

[Nichols]

---------------------- multipart/alternative attachment
David,
    What is your climate like? CA (superglue) works well in wet climates, 
Garfields (glycol) works well in dry climates. Epoxy is an option when 
there are major cracks in the block. All are cheaper than block replacement 
or oversize pins.

Good Luck,
Guy Nichols, RPT
Ft. Stinkin' Desert, NM


At 10:43 AM 8/14/2005 -0400, you wrote:
>I am still new at tuning and repairing pianos.  I have Fischer upright 
>that was given to me.  I am attempting to get it  back into some sort of 
>playable condition and gain experience at the same time.  All the tuning 
>pins are loose and will not hold a tune.  What is the best way to solve 
>this problem short of replacing the pin block?
>
>Thanks
>David

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/46/01/98/e7/attachment.htm

---------------------- multipart/alternative attachment--