This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Thanks for the head's-up on the keytops. I think this thread started just with gluing felt to metal, but it has mutated into several things! Oh well, still learning a lot! John _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Alan Barnard Sent: Tuesday, August 23, 2005 2:08 PM To: Pianotech Subject: RE: CA glue + Elmers for Ivories I only have one "word" to say on all this: PCV-E Why "mess" with anything else for key tops? Alan Barnard Salem, Missouri ----- Original Message ----- From: Joe <mailto:joegarrett@earthlink.net> Garrett To: pianotech <mailto:pianotech@ptg.org> Sent: 08/23/2005 1:49:27 PM Subject: CA glue + Elmers for Ivories I know Ssssssn is gunna have a cow, but I just gotta say it. Please don't use the CA/Elmers on replacing Ivories!!! PLEASE!!!!???? I'm in the process of doing a re-whatever on a set of European Upright Keys. 1/2 of the keys still have/had beautiful, thick Ivory, that could be salvaged. Several had been "re-glued" with that damned concoction! There was no way in hell, those could be salvaged!! What a damned waste!! grrrrr! O.K. I'll get off my soapbox. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/29/24/ed/f2/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC