Soundboard-to-Rim Gluing

David Ilvedson ilvey@sbcglobal.net
Mon, 29 Aug 2005 16:20:58 -0700


This is a multipart message in MIME format

---------------------- multipart/related attachment
--21DF1631-646D-435A-86DF-E2520944E204
The lower end of the tenor and the entire transition bridge lie=
 upon a common base or foundation. The base is contoured to mate=
 to the soundboard, just like the bottom of the long bridge.=
 There is no cantilever at all. Below is a picture of the bridges=
 in the piano installed on my new clear soundboard.
 

----- Original Message ----- 
 
That board looks very nice. What is the tenor bridge sitting on?=
 From this angle it looks like a reversed cantilever.
Do you have more pictures?
 
 Calin Tantareanu


--21DF1631-646D-435A-86DF-E2520944E204
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4b/c1/e1/4a/attachment.htm

--21DF1631-646D-435A-86DF-E2520944E204--

---------------------- multipart/related attachment
A non-text attachment was scrubbed...
Name: SSCN1413.JPG
Type: image/jpeg
Size: 74998 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/d8/e8/57/09/SSCN1413.JPG

---------------------- multipart/related attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC