This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello John Thanks for your input! ;-) In fact the old pins aren't as described in = this particular case. The thought of using new chrome instead of blued = pins just for the look of them and in the hope that same-size new pins = might possibly, with the use of CA, be an option.... In reaming the hole = a larger size pin is indeed the only option.... but if it doesn't need = reaming ... what then? This is for open discussion so I'm posting to the = List ----- Original Message -----=20 From: John Ross=20 To: Michael Gamble=20 Sent: Friday, July 01, 2005 10:44 PM Subject: Re: re-stringing and CA Sounds like the holes need reamed to new wood. Then the low torque = pins as suggested, size determined by the amount of wood removed. Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message -----=20 From: Michael Gamble=20 To: John Ross ; pianotech@ptg.org=20 Sent: Friday, July 01, 2005 6:36 PM Subject: Re: re-stringing and CA Hello John and List The old pins are grotty, rusted and deformed and would not be worth = preserving and re-bluing. Apart from which the old pins will have their = scoring (the end part of the pin which is in the plank) filled with old = wood particles and rust. The new pins will be chromed and indeed .. new. = The object is to find out what your collective reaction is to CA-ing in = new pins. Regards Michael G.(UK) ----- Original Message -----=20 From: John Ross=20 To: Pianotech=20 Sent: Friday, July 01, 2005 9:52 PM Subject: Re: re-stringing and CA Hi Michael, It doesn't make sense to buy the same size, new.=20 If you want to try the C/A, save your customer the cost of the = new pins, you can always 'reblue' the old ones. John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message -----=20 From: Michael Gamble=20 To: pianotech@ptg.org=20 Sent: Friday, July 01, 2005 5:35 PM Subject: re-stringing and CA Hello List Thought I'd start a thread about re-stringing. We usually use = the "next-size-up" tuning pins when re-stringing but basic science tells = me that the smaller the pin the less unwinding leverage on it from the = string. So. How about a new set of tuning pins the same size as the old = and using CA to "glue" them in....Ha! Ha! Regards from a darkening wintry Sussex village Michael G.(UK) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fa/32/45/73/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC