---------------------- multipart/alternative attachment Hi Gordon, Sounds as if you have growing action brackets. Contact Young Chang about Warranty replacement. Good luck. Regards Roger At 05:13 PM 7/1/2005, you wrote: >I have been tuning a mid-sized Young Chang grand for a >serious client for several years now. Each time I go >to tune it I find the hammers blocking at the strings. >I'll turn down the let-off dowels to some degree of >let-off to get me through the tuning. But each year I >go back to her house the condition is the same, the >hammers are blocking again. I want to regulate this >piano as it should be but I am concerned that I will >be frustrated by whatever it is that causes the return >of this blocking condition. >Does this sound familiar to anyone? Could this be a >loose let-off rail? I have marked the capstans to see >if they were turning on their own and they don't >appear to be. > > > > > > > >__________________________________________________ >Do You Yahoo!? >Tired of spam? Yahoo! Mail has the best spam protection around >http://mail.yahoo.com >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/04/6b/ca/0c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC