SAT battery

John Ross jrpiano@win.eastlink.ca
Fri, 08 Jul 2005 12:13:44 -0300


I wouldn't risk removing the disk, unless you parallel connect another 
battery with it. It IS your program hold on voltage.
When it is time to replace the disk, it might be advisable to send it back 
to Inventronics for a service.
The do any updates, and also replace the capacitor. I believe it only costs 
$125, plus the battery cost.
The operation of the voltage system, as I understand it, is. When you turn 
it on, the charged battery charges the capacitor, which keeps the program. 
If the capacitor goes flat, then the disk keeps the program.
That is why, if you are not using it, you should turn it on once a week, to 
keep the capacitor charged.
If the disk goes flat, then you have lost the memory and it has to go back 
to be reprogrammed.
The rechargeable battery just runs the program, as you use it.
The beauty of the SATlll is that it has a flash memory, and doesn't lose 
it's program.
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
----- Original Message ----- 
From: "David Nereson" <dnereson@4dv.net>
To: <pianotech@ptg.org>
Sent: Friday, July 08, 2005 3:19 AM
Subject: SAT battery


> To those who have replaced SAT batteries themselves:  Where do you get 
> rechargeable NiCads?  Is it the AA size that's used?  Does MAH stand for 
> milliamp-hours, or what?  If I remove the disc battery to get its number 
> (if it's not visible on top), will I lose all my stored info?   (I too, 
> would rather not pay a hundred and a quarter plus shipping just for this 
> service; what else does Inventronics do that makes them feel the charge is 
> justified?) -- David Nereson, RPT
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
> 


This PTG archive page provided courtesy of Moy Piano Service, LLC