Spinet Bass String Replacement

[Joe Garrett]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
pc said: "Matthew: I usually find it possible to replace a bass string =
on a spinet =3D
without pulling the action. Use the damper pedal to get the dampers out =
=3D
of the way, feed the string down to the bridge, and anchor it with a =3D
Visegrip or other clamp. Good luck! =3D20"

It's advisable to use a Safety Pin to "guide" the string down to the =
bridge!
Regards,
Joe Garrett, R.P.T.
Captain, Tool Police
Squares R I
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/59/99/b4/85/attachment.htm

---------------------- multipart/alternative attachment--