black finishing techniques

altieri altieri@nepiano.com
Wed, 13 Jul 2005 12:45:42 -0400


This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
I've been working with the India ink myself in refinishing a Steinway
upright.  It was all beat up from some school and the enamel paint was
chipping away etc.  


I've been extremely happy with the 'opaqueness' of the application and can
post some pictures this evening if you like.  I've been playing with using a
coat of shellac over the India ink to seal it and then a few coats of the
Waterlox Satin Tung Oil Based Sealer.  I've used the shellac successfully
but haven't gotten to the waterlox step in my process yet.  I'll keep you
updated.  Also, I did a little test between India inks.


If you go to Dick Blick Online you can get either their own
Blick Black Cat Waterproof India Ink for under $10 a quart 
or the Sanford Higgins Waterproof Black Ink for $26.99
http://www.dickblick.com/zz211/15/ 


I bough a bottle of both because of the huge price difference for the same
amount of ink.  I would say that the Blick Ink might work but you will use
at least twice as much of it to attain the same opaque finish that the
Higgins ink provides.  A lot of the pieces I've used the Higgins ink on
require one thin coat of the ink to turn it completely black.  I would
definitely spend the extra money and go with the Higgins.  As far as I can
tell, I think I'll only need the one quart to finish the entire upright that
I'm working on right now.. I don't see how you could need more than 2 quarts
to finish a grand.  It goes on really well.


 


-Jim Altieri


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/21/3e/8e/05/attachment.htm

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC