This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment John, OOOOOPS!<G> That should have read 1/4"x3/8"!!!!! Senior moment there.<G> Joe Garrett, R.P.T. Captain, Tool Police Squares R I ----- Original Message -----=20 From: John Fortiner=20 To: 'Joe Garrett'=20 Sent: Saturday, July 16, 2005 8:49 PM Subject: RE: The Zippo! (Front Rail Tool) Joe: How do you get a 1/8th inch opening ( 0.125 over a front rail = pin that is 0.145 in width??? Inquiring mind wanting to know. John Fortiner Billings -------------------------------------------------------------------------= ----- From: Joe Garrett [mailto:joegarrett@earthlink.net]=20 Sent: Saturday, July 16, 2005 7:22 PM To: pianotech Subject: The Zippo! (Front Rail Tool) All, Enclosed, my tool of the day! Once I had drilled/milled it to size, = (1/8"x3/8"), and held it in my hand, it felt and looked like a miniature = Zippo Lighter...Hence the name. Once you try one of these gems, you'll = never straighten key pins any other way!<G> The left Zippo is in the "assembled" mode. The center Zippo shows the = end view. The right Zippo is in the "storage" mode.<G> Just thought = y'all'd like to see.<G> Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b8/eb/f2/3c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC