This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Michael, All this "hoity toity" blowhard stuff about using a temperament strip or = just a few mutes is somewhat like the arrogant fallderall that we used = to hear from "tuners" when they were railing against ETDs! Same Crap, = IMHO! THEN.....sigh....you turn right around and say that you replace hinge = pins with coat hanger wire! Yikes! Why not hair pins or paper clips or = baling wire or some other "Slock" fix. My question is this: Are you a "high end" Technician or not. As it = appears you are not, even though you would like us to believe you are. I = chose to believe you are, but I'm having a real hard time accepting it, = at this point. You either are or are not. Ya can't have it both ways, = IMO. I'm not trying to start a fight here, but your comments will carry some = level of credance with some of those who are looking for "Proper" = guidance in this industry. The Coat Hanger thingee is, IMO, a last ditch = effort or at least a Temporary one and should be presented as such. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/72/52/ac/8f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC