Howdya get CA off of polyester???

Overs Pianos sec@overspianos.com.au
Fri, 29 Jul 2005 23:06:50 +1000


---------------------- multipart/alternative attachment
Hi all,

CA can be dissolved with acetone. Acetone won't hurt polyester, 
particularly if its only in contact with the polyester for a short 
time. After you wash the CA off, just polish the polyester surface 
again with any of the polymer polishes. It will take the slight 
dulling off to come up just like new. But please make sure that the 
finish you are proposing to removing the CA from is indeed polyester. 
If its acid cat or any of the other lacquers, acetone will remove 
both the CA and the lacquer coating.

Ron O.

>And then of course, have your buffing wheel available!
>
>Terry Farrell
>
>
>I have scraped it off with a razor or knife and then dressed the 
>finish with a little 4/0 steel wool. You could even use some 600 
>sandpaper first and then the steel wool. Try an inconspicuous area 
>first to see how it is going to look on the finish. But if you can 
>hardly see it now probably hitting a couple of times with the steel 
>wool will make it disappear.
>
>Dean
>Dean May
>
>I just finished tuning a satin walnut polyester piano that has a few 
>loose pins.  It's a couple of years old, and still under warranty, 
>but I figured I try to CA a couple of pins anyway. 
>
>Just to prove that performing that operation requires care and 
>patience, I spilled a very small amount on the keyslip....:-([(
>At least it isn't laquer.  I got most of it off before it had time 
>to set, but as we all know, the stuff dries durned fast!  So there 
>are a couple of very small marks on the front. 
>
>The finish doesn't appear to be damaged at all, and it's hardly 
>visible, but I can see it.  I'd like to do right by the customer and 
>get it off if possible, but I didn't want to apply chemicals that 
>might take the finish off in conjunction with the glue...
>
>If any of you have an idea about how to remove this stuff, please let me know!
>
>It's always on the fourth tuning of the day...
>
>Thanks in advance!
>
>Dave Stahl


-- 
OVERS PIANOS - SYDNEY
    Grand Piano Manufacturers
_______________________

Web http://overspianos.com.au
mailto:ron@overspianos.com.au
_______________________
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/42/fa/31/9d/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC