tuner needed

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Sorry Pat and others Oregon.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Joe And Penny Goss=20
  To: Pianotech=20
  Sent: Wednesday, June 08, 2005 4:54 PM
  Subject: tuner needed


  Baldwin accrosonic being moved to Medford will need tuning in a =
monthe. Anyone here on the list? or aa name please. I use to look up =
referals in the directory but this years addition does not give the =
address with the regional listing. bummer
  Joe Goss RPT
  Mother Goose Tools
  imatunr@srvinet.com
  www.mothergoosetools.com
    ----- Original Message -----=20
    From: Joe And Penny Goss=20
    To: Pianotech=20
    Sent: Wednesday, June 08, 2005 4:18 PM
    Subject: Re: re:Kawai CA-40


    Hi Michael, If you use CA to make the bushings a little firmer,
    use older glue that has thickened a little ot the medium thick.
    The thin will wick in too far so if you have tight pins they will be =
really tight.
    Only try it in a few at first so as to get a feel for what the =
outcome will be with the glue you are using
    Joe Goss RPT
    Mother Goose Tools
    imatunr@srvinet.com
    www.mothergoosetools.com
      ----- Original Message -----=20
      From: Michael Gamble=20
      To: pianotech@ptg.org=20
      Sent: Wednesday, June 08, 2005 11:06 AM
      Subject: re:Kawai CA-40


      Hello List
      From SunnySussex where we have a problem with one of our pianos at =
Glyndebourne. Doesn't stay in tune. This is not one I tune for there are =
two of us and this is a rehearsal stage piano. My colleague asked me to =
have a go at it while he stood by. It seems it was tuned just yesterday =
and already the top two breaks were in trouble and the effect was =
creeping down into the middle break - unisons weren't unison. Yuk! So I =
inspected it and found there is quite a lot of Joe G's "flag-poling" =
going on. Of course you recognise the model (it also has MII stencilled =
on the web beside the CA-40). My gut feeling is there is too much "give" =
in those wrest-pin bushings. I was just wondering whether a good old =
dose of CA might not be in order...it might just harden those =
bushings...What do you think?
      Over to you!
      From a sunny Sussex evening in the Downland Village. The Elm trees =
at the bottom of my garden have Dutch Elm Disease and tomorrow they're =
all being cut down. The condition is shewn by a black ring between the =
bark and the wood - a knife cut will reveal the problem.
      Michael G.(UK)
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/96/14/05/74/attachment.htm

---------------------- multipart/alternative attachment--