>I did go back and look at this magic line and it really needed to be >adjusted - thank you. > >What I have also done to the pivot point is something that Brett >Dearing designed and that is to move it so that it is on the same >plane as the damper lift lever flange center pin. This required >building new pivot pin support blocks extending farther into the >keybed and adding excess material to the ends of the tray. >Now the tray and levers pivot on one plane rather than two. > >Gene Yes, we set the tray and lever centers on the same axis also when doing a refit. Best regards, Ron O. -- OVERS PIANOS - SYDNEY Grand Piano Manufacturers _______________________ Web http://overspianos.com.au mailto:ron at overspianos.com.au _______________________
This PTG archive page provided courtesy of Moy Piano Service, LLC