upright voicing procedure

Jurgen Goering pianoforte at pianofortesupply.com
Fri Aug 4 15:58:04 MDT 2006


There are a few tools which allow needling the underside of upright 
piano hammers with the action installed.  Two specialized tools are 
pictured below.  One is the "Orca" single needle voicer.  It has the 
needle mounted in a sphere which can be fixed so the the needle points 
in almost any direction.  The other is a ring voicing tool which can be 
held between fingers or worn like a ring.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 392 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060804/1a459489/attachment-0004.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Orca18B.a.jpg
Type: image/jpeg
Size: 6798 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060804/1a459489/attachment-0002.jpg 
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 4 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060804/1a459489/attachment-0005.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ring-voice-15.a.small.jpg
Type: application/applefile
Size: 52847 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060804/1a459489/attachment-0006.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ring-voice-15.a.small.jpg
Type: image/jpeg
Size: 32154 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060804/1a459489/attachment-0003.jpg 
-------------- next part --------------


	

Jurgen Goering
Piano Forte Supply
(250) 754-2440
info at pianofortesupply.com
http://www.pianofortesupply.com


On Aug 4, 2006, at 12:54 PM, Ed Miller wrote:
Would anyone be willing to share their procedure for voicing hammers in 
and
upright action?

I'ver never done it before. Voicing on a grand seems somewhat more
practical, since it is easy enough to slide the action in and out. But 
it
seems like a hassle to take the action out in between listening in 
order to
needle the hammers bottomsides.

Thanks,
Ed
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 630 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060804/1a459489/attachment-0007.bin 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC