1/2 punching

[David Ilvedson]

Ric,

"Sloif"?   Please don't use Norwegian unless you're prepared to translate...;-]
I'm going to assume "sloif" means toss in English...right?

David Ilvedson, RPT
Pacifica, CA  94044


----- Original message ----------------------------------------
From: "Ric Brekne" <ricbrek at broadpark.no>
To: pianotech at ptg.org
Received: 8/4/2006 3:32:34 PM
Subject: 1/2 punching


>Hi David

>It lowers the effective key ratio just a bit and significantly impacts 
>touchweight.  I generally sloif the half rounds and glue a strip of 
>flange paper along the backs of balance rail pins for whole sections. 
>Works great lasts a long time.  Usually about 0.2 mils is enough to do 
>the trick.

>Cheers
>RicB