I use MacLac which is a higher solids lacquer than Steinway uses so the dilution is greater (6 or 7:1). Since Steinway is now predipping their hammers I don't know what I would use. I'm rapidly moving away from hammers that require lacquer, especially unknown quantities. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Dave Smith Sent: Wednesday, August 16, 2006 1:25 PM To: Pianotech Subject: Source fof High Solids Lacquer I'm about to voice my first set of new Steinway hammers (with the help of Mr Bondi). I've checked the archives, and found reference to a source for the lacquer to use, I think it was David Love, but did not find the source mentioned. Can anyone tell me where to find the appropriate lacquer? THanks Dave Smith SW FL -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060819/3bc0a232/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC